To receive the latest news on our products, subscribe to our e-newsletter below:

The InViroMon Master unit is designed to be fitted into standard 19” sever racks/cabinets. Used in conjunction with InViroMon metered PDUs and other InViroMon products, this unit can monitor up to 12 cabinets over one IP address.

Ideal for data centers, telecom, finance, electric power, network systems and information processing as well as SOHO and other fields needing remote monitoring.

On its own,his unit can have the following basic configuration:

• Monitor a max of 4 metered PDUs
• 2 Temperature/Humidity sensors
• 4 Door sensors
• 1 water sensor
• 1 smoke sensor

• Rated Input Voltage: 110/220VAC ~ 50/60Hz
• Input Standard: IEC320 C14 (x1)
• Serial Port for the voltage/current of metered PDU: RJ 45 (x4)
• Serial Port for Power Measure Signal: RJ 45 (x4)
• Serial port for UPS Signal: RJ 45 (x2)
• LINK: RJ 45 (x2)
• PORT: RJ 45 (x1)
• Internet: RJ 45 (x1)
• Temperature/Humidity Sensor: RJ 11 (x2)
• Door Sensor: RJ 11 (x4)
• Smog Sensor: RJ 11 (x1)
• Water-Logging Sensor: RJ 11 (x1)
• L x W x H: 483mm x 132mm x 45mm
• Horizontal Installation: 1U
• Color: Black

InViroMon Slave Unit - links to Master unit and LCD Meter through Ethernet. This unit is used to monitor more than one cabinet through 1 single Master unit (i.e. 1 IP address).

InViroMon HUB Unit – acts as a multi-port unit that enables you to connect on Master unit to 11 slave units (i.e. monitor up to 12 cabinets)

InViroMon Sensors – InViroMon sensors that are connected to the master and provide information about temperature, humidity, smoke, water and door status.

RELATED PRODUCTS

• 
  
  InViroMon Door Sensor

  The InViroMon Door Sensor (IVM-SDOOR) is used to monitor the door open/close status of your server cabinet. It can be connected to the InViroMon Master, Slave and Network Power Manager.

  
• 
  
  InViroMon HUB

  The InViroMon HUB is a multi-port unit which enables you to effectively link 1 master unit to 11 slave units and ensure that no fautly slave affects the communication of any other slave with the master.

  
• 
  
  InViroMon PDU | 12 outlets | horizontal | 19" | 2RU

  This 10 AMP Metered Power Distribution Unit is 2RU high and is fitted with 12 outlets as well as an LCD MODULE to allow remote monitoring of voltage, current and power consumption – Mounts across standard 19” racks

  
• 
  
  InViroMon PDU | 14 outlets | vertical | 10 AMP

  This 10 AMP Metered Power Distribution Unit is vertically installed and is fitted with 14 outlets as well as an LCD MODULE to allow remote monitoring of voltage, current and power consumption – Mounts across standard 19” racks.

  
• 
  
  InViroMon PDU | 15 outlets | horizontal | 19" mountable |15 AMP

  This 15 AMP Metered Power Distribution Unit is 1RU high and is fitted with 15 outlets as well as an LCD MODULE to all remote monitoring of voltage, current and power consumption – Mounts across standard 19” racks.

  
• 
  
  InViroMon PDU | 5 outlets | horizontal | 19" mountable

  This 10 AMP Metered Power Distribution Unit is 1RU high and is fitted with 5 standard 3-pin outlets as well as an LCD MODULE to allow remote monitoring of voltage, current and power consumption – Mounts across standard 19” racks.

  
• 
  
  InViroMon Slave Unit

  The InViroMon Slave unit is an add-on to the Master unit that allows you to monitor the micro-environments of more cabinets through a single master unit (i.e single IP).

  
• 
  
  InViroMon Smoke Detector

  The InViroMon smoke detector (IVM-SSMOK) is used to monitor the smoke levels present in your server cabinet. It can be connected to the InViroMon Master, Slave and Network Power Manager.

  
• 
  
  InViroMon Temperature | Humidity Sensor

  The InViroMon Temperature/Humidity detector (IVM-SSMOK) is used to monitor the smoke levels present in your server cabinet. It can be connected to the InViroMon Master, Slave and Network Power Manager.

  
• 
  
  InViroMon Water Detector

  The InViroMon Water detector (IVM-SWATE) is used to monitor the water levels present in your server cabinet. It can be connected to the InViroMon Master, Slave and Network Power Manager.